Hard drive data loss due to presence of bad sectors, file system corruption, or other such inconsistencies of the drive are some of the common issues that are faced by Windows users. However, if you have a tool that monitors its health, then it is easy to prevent data loss. One such tool is SeaTools by Seagate.
Seagate, one of the largest hard drive manufacturers, has released its hard drive diagnostic tool, which determines the condition of any hard drive: internal or external, desktop or laptop.
The simple steps and easy installation make it an easy and efficient tool. To test a drive, you simply need to download and install the utility on your Windows-based computer. When you run the tool and select the hard drive to be checked, you will get a menu of the options available for diagnosing your drive. The diagnostic tests available on SeaTools are:
- SMART Check: This is the basic hard drive monitoring test, performed by almost all the hard drive diagnostic tools. Through this feature, the status of your hard drive is monitored with the help of S.M.A.R.T features. Your system reports a S.M.A.R.T error when when your hard drive has several bad sectors, has more than high ventilation temperature, or any one of several other issues. Backing up your data and replacing your drive remains the only resolution serious issues like these.
- Short Drive Self Test: Upon running ‘Short Drive Self Test’ almost all the drives will run an intense diagnostic routine, which is built inside the firmware of hard drive. However, this diagnostic test of hard drive is completely data safe, and hence you need not to worry about your data. Generally, it is the most adequate test for most of the cases of hard drive health diagnosis.
- Long Drive Self Test: This test of hard drive is extensive than ‘Short Drive Self Test’ because it reads all the sectors of the drive, which is why it takes more time to complete. However, the amount of time taken by the process depends upon the capacity of your hard drive and its speed. The highest capacity drives take at least two to four ours to complete the process. Beware: the time taken by this process and lack of activity can give the false impression that your hard drive has stopped responding. You should not abort this process abruptly until the first 10% of the drive.
- Short Generic: The test does a quick scan for all possible errors. The process involves three segments: outer scan, inner scan, and random read.
- Long Generic: Since this test is a comprehensive test and scans entire hard drive, it may take long hours to complete. However, you can abort this test any time in between the process, however it will fail automatically, or abort abruptly, if it find any bad sector on internal hard drive. On the other hand, if you have bad sectors on an external hard drive and you are running this test on it, then the test will give you option to repair the sectors. Therefore, the test does not fail, if it finds bad sectors on an external hard drive instead it gives option to repair it.
With all above mentioned tests, SeaTools has some other advanced tools as well for up-gradation of the hard drive firmware and disk format as well. Apart from these, most of the hard drive status tests do not encounter data loss and can be aborted; therefore, taking care during all the processes is a must.
On completion of any of these processes, its log is saved on the RAM drive. You may find out any of the below mentioned results of these tests:
- And aborted
Most of the times, the results of these tests is positive or show ‘PASS’ status. However, you may find inconsistencies while extracting your data even after successful completion of these tests or getting a passed result. It is when your hard drive you have corrupt data in your hard drive. In such cases using CHKDSK (or checkdisk) can do the needful for you. However, if the checkdisk operation too fails, then reinstallation of data is required.